~ Commercial Aquatic Equipment & Supplies ~                                                       
For Questions, please email to  custserv@aquamasters.com  
The Source of Your Aquatic Equipment, Needs, & Supplies    

Schedule 80 Ball Valves - Thermoplastic Ball Valves

Ball Valves, EPDM Seals, (The Good Ones!)
(Available in Socket or Threaded). 

DESIGN ADVANTAGES

• Low-Priced ball valve
• Working pressure ratings similar to Safety Block style @ 150 p.s.i
• Offered in socket, threaded and flanged end connections.
• Handle position indicates open/close position

Socket Connections (Slip x Slip) Valves:

Part #	Description	Price	Order
ValvBall050S	1/2" Ball Valve, EPDM, Schedule 80, Socket	5.95
ValvBall075S	3/4" Ball Valve, EPDM, Schedule 80, Socket	6.65
ValvBall100S	1" Ball Valve, EPDM, Schedule 80, Socket	9.25
ValvBall150S	1.5" Ball Valve, EPDM, Schedule 80, Socket	18.25
ValvBall200S	2" Ball Valve, EPDM, Schedule 80, Socket	19.95
ValvBall300S	3" Ball Valve, EPDM, Schedule 80, Socket	79.00
ValvBall400S	4" Ball Valve, EPDM, Schedule 80, Socket	129.00

Threaded Connections:

Part #	Description	Price	Order
ValvBall050T	1/2" Ball Valve, EPDM, Schedule 80, Threaded	5.95
ValvBall075T	3/4" Ball Valve, EPDM, Schedule 80, Threaded	6.65
ValvBall100T	1" Ball Valve, EPDM, Schedule 80, Threaded	9.25
ValvBall150T	1.5" Ball Valve, EPDM, Schedule 80, Threaded	18.25
ValvBall200T	2" Ball Valve, EPDM, Schedule 80, Threaded	19.95
ValvBall300T	3" Ball Valve, EPDM, Schedule 80, Threaded	79.00
ValvBall400T	4" Ball Valve, EPDM, Schedule 80, Threaded	129.00

COMPACT BALL VALVES (1/2" - 4")

DESIGN SPECIFICATIONS
Thermoplastic ball valves 1/2" - 4" shall be compact type and have a one piece molded body with socket or threaded end connections. Seats shall be EPDM Teflon. Every valve is fully pressure and cycle tested to insure a quality molded in place finished product.  Valves have a one piece self centering ball and stem design for leak tight operation. Materials of construction shall be as follows: (select as required for service)

BODY  PVC, CPVC, ASTM D-1784

BALL & STEM  PVC, CPVC, ASTM D-1784

SEATS
EPDM, Ethylene Propylene Diene Monomer
Teflon

SEALS EPDM, Ethylene propylene Diene Monomer

MANUAL LEVER  ABS D-1788

End connectors shall conform to the following standards:

SOCKET
ASTM - D-2467 (PVC, SCH-80)
ASTM - F-439 (CPVC, SCH-80)

THREADED
ASTM - D-2464 (PCP, SCH-80)
ASTM - F-439 (CPVC,SCH-80)

Not recommended for compressed air or gas service.

Back to Aquamasters Valve Catalog

Back to Aquamasters USA On-Line Catalog

          
Orders must be Pre-Paid by major credit card: Visa, MasterCard, Discover, Certified Check, Money Order, or Check in Advance.   Aquamasters, Inc. reserves the right to require a certified check in lieu of credit card for certain items.  All Sales are Final.  No returns on special order items.   For returns of Stocking Items, there will be a 25% Restocking Fee on Product Only.  We cannot refund shipping costs.  
Shipping: Most Items can ship UPS.  Orders over 150-Lbs (combined)  or items that are too large to ship UPS will be sent via (Motor Freight Carrier) at an additional expense.  Some items less than 150-lbs must be shipped via Motor Freight because of "dimensional weight."  Questions about Shipping, Email us at custserv@aquamasters.com for Freight Quote. We need City, State, & zip code.   Hours are  9am - 5pm Eastern Time (EST).  You can Order On-Line or Call (410) 252-2079.  Not Shipping Overseas at this time.
Minimum Order $50.00.  Orders under $50 may be subject to an additional handling fee.  Copyright 2006  Aquamasters, Inc.    Last Updated February 2006.  Prices are in US Dollars & are Subject to Change without Notice.  Emailed Quotes are good for 30 days unless otherwise specified.    Aquamasters Home Page